Bonding Agents
SikaLatex®
Water Resistant Bonding Agent for Mortar
Use
- Thin layer patching mortars.
- Renders.
- Floor screeds.
- Concrete repair mortars.
- Abrasion resistant lining.
- Tile fixing motars
Characteristics and Advantages
- Improved fluidity.
- Increased cohesion.
- Economical.
- Volume expansion in the wet state.
- Chloride free.
Colour
Powder pale brownPackaging
5 litre
25 litre
200 litre
Product Data Sheet
SikaLatexSikaCem®-810
Reactive Bonding Agent and Mortar Improver
Use
- Improving the performance of rendering mixes, repair and patching mortars.
- In bonding slurries.
- As a hardener and dustproofer for cement screeds and flooring that are subject to heavy wear.
- In bedding mortars.
Characteristics and Advantages
- Improved bond strength.
- Increased workability.
- Significantly higher flexural, tensile and compressive strengths.
- Greater resistence to wear abrasion.
- Stability of green mortart significantly increased.
- Improved impermeability to water.
- Increased resistance to chemical attack.
- More dense and uniform surface finish to mortars, Toppings and renderings.
- Non-corrosive (will not attack steel reinforcement).
Colour
Liquid light greyPackaging
5 litre
20 litre
Product Data Sheet
SikaCem-810SikaTop Armatec 110 EC
Bonding Agent and Anti-Corrosion Coating
Use
- Bonding agent for use on concrete, mortar or steel.
- For repairs to concrete using Sika's patching and repair mortars.
- For bonding new concrete to old (wet to dry).
- Anti-corrosion caoting for reinforcing steel.
- For repairs to reinforced concrete where there is corrosion of the steel.
Coverage / Usage Approx: Bonding agent: 1.5 -2.0m2/ltr Anti-corrosion coating: 0.5 -1.0 m2/coat
Characteristics and Advantages
- Excellent ashesion to steel and concrete.
- Acts as an effective barrier against penetration of water and chlorides.
- Contains corrosion inhibitors.
- Provides an excellent bonding coat for subsequent application of repair mortars (cement and epoxy cement based).
- High degree of mechanical strength.
- May be spray applied.
Colour
Component A white liquid Component B yellowish liquid Component C light grey powderPackaging
1.75 litre
Product Data Sheet
SikaTop Armatec-110 EpoCemSikadur®-32 N
Epoxy Resin” Wet To Dry Bonding Agent
Use
- Sikadur®-32 N is used for bonding fresh concrete to an existingconcrete or mortar substrate. It is also suitable for vertical anchor bolt grouting.
Coverage / Usage Approx: 2 – 4 m2 per litre depending on the porosity of the substrate
Characteristics and Advantages
- Easy to mix and apply.
- Solvent free.
- Components of different colours to ensure thorough mixing.
- Excellent adhesion to concrete and a wide variety of other substrates.
- Tensile strength far greater than concrete.
- Can be applied to damp substrates.