Cementitious grout is a free flowing, cementitious mortar or paste with special mechanical properties that can be poured or injected to fill gaps, crevices or voids. Cementitious grout is made up of a mixture of water, cement, selected fillers, aggregates and special additives.
Product Development of SikaGrout®-295 ZA
Interesting Facts About Gouda Windfarm
Easy Usage
SikaGrout®-295 ZA is easy to use as it only requires to be mixed with water. The product can be easily poured or pumped. It is highly recommended that the concrete substrate should be pre-soaked in clean water for a minimum of two hours beforehand. Failure to do so is likely to result in the concrete extracting from the grout, affecting its cure, leaving a potential for cracking and reduced adhesion.
Application Instructions can be found on the Product Data Sheet.
Fatique Test Certified
SikaGrout®-295 ZA – once it's fully cured – can achieve compressive strengths similar to C90 concrete and can be pumped above 100m high. This product has been fatigue tested and certified internationally by Applus*.
*Applus is a worldwide leader in the testing, inspection and certification sector.
Expert Advice
Specifying the correct quantity and strength of grout is a basic requirement for a quality application, but it’s a simple trick that can sometimes be missed. Sika’s technical team is available to eliminate the risk of such oversights. Our staff have the necessary expertise and product information to ensure correct grout quantity and type for a particular project and are also available for site visits to offer application guidance.