Sika has developed new software for calculating the amount of SikaFiber® required for slab on grade fiber reinforced concrete (FRC). This efficient tool is suited for professionals with expert knowledge in this application. SikaFiber® polypropylene macro-fibers are the ideal solution for partially or totally replacing bulky steel bar or mesh reinforcement in concrete slabs, saving time and money in the construction process. Compared to steel reinforcement, macro-fibers are homogeneously distributed throughout the concrete - increasing durability, reducing cracks and shortening construction time.
SikaFiber® technology provides several opportunities to improve the fresh and hardened concrete properties in fiber-reinforced concrete. This is especially the case for ground-bearing concrete slabs where SikaFiber® will enhance durability, save time and money.
SikaFiber® is simply added during the concrete production and embedded in the cement-paste matrix as the concrete is being placed. Macrofibers are especially effective in strengthening edges and corners where conventional reinforcement cannot reach. SikaFiber® transfers forces in the hardened concrete state as an alternative replacement for conventional steel reinforcement. The benefit of reducing reinforcement is the economizing on the weight of reinforcement steel; reducing time in the construction process and overall saving time and money. The SikaFiber® dosage depends on ground conditions, applied loads, concrete strength and slab thickness.
What the SikaFiber® Software Can Do
With the new SikaFiber® software, Sika provides a tool for designing fiber-reinforced concrete (FRC) slabs on grade reinforced using polypropylene or steel macro fibers. The tool will determine the optimum dosage of fibers required to reinforce the slab for the specified loading, slab thickness and concrete grade.
Features of the SikaFiber® Tool for Advanced Structural Design
Free licensed software
Complex calculations in minimal time
Calculate with two recognized standards
Available in multiple languages
Maintained and up to date
Benefit from the SikaFiber® global range
Sika technical support
Download the sample printout to see an example of the output. Then specify this product in the project.
Contact your local Sika expert if you have any questions about the software or product recommendations.
Download the SikaFiber® Software
This software application and the results derived from its utilization are intended only for use by professional users with expert knowledge in the area of the intended application. Users must independently verify the results before any use and take into account the site and application conditions, product data sheet and product literature, technical state of the art as well as local applicable standards and regulations.
With respect to the software application and results derived from its use, Sika makes no warranties of accuracy, reliability, completeness, merchantability or fitness for any purpose. The software application is provided on an "as-is" basis and Sika expressly disclaims any warranties with respect to the software application and results derived from its use.
Sika shall not be liable for any consequential, punitive, incidental, exemplary, or special damages (including but not limited to loss of business opportunity or loss of profit) arising out of the evaluation or use of the software application and results derived from its use.
The information and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product's suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Except as indicated otherwise, all information, text, graphic images, features, functions, and layout contained in this software are the exclusive property of Sika and may not be copied or distributed, in whole or in part, without the Company's express written consent.
By transmitting information to Sika, you grant to the Company the unrestricted irrevocable license to use, reproduce, display, modify, distribute and perform such information. Personal identity information is used by Sika only to process a request for information by you or for marketing our products and services.
©Copyright Sika Services AG 2016
I have read, understood, and agreed to the above statements by clicking below: