FIND THE RIGHT PRODUCT FOR YOUR PROJECT
What waterproofing is required?
Select your answer below
Frequently Asked Questions
Please contact our customer service (031 792 6500) before application to ensure that no other preparation needs to be done before applying Sikalastic®-560.
Please contact our customer service (031 792 6500) before application to ensure that no other preparation needs to be done before applying Sikalastic®-560.
No, we do not recommend coating over Sikalastic®-560.
Sika® Reemat Premium is a glass fibre mat reinforcement for the Sikalastic® Liquid Applied Membrane system. It is recommended to use when doing detailing work around pipes, penetrations and upstands, along with increased strength and performance for longer service life.
No, a torch-on membrane that is lifting and cracking suggests that it is past its service life and would have to be removed prior to the application of Sikalastic®-560.
Please contact our customer service (031 792 6500) for advice on removal of existing torch-on membrane before applying Sikalastic®-560.
Sika® RainTite Kit (5l container with an attached 200mm x 10m roll of membrane) will cover approximately 2.3m2 of the surface.
Sika® Cemflex® is mixed with cement and water and cement is highly alkaline. we recommend the product to cure for 5 - 7 days, wash mop 3 - 4 times with clean water. Fill the pond and ensure that the water is properly conditioned. Check PH levels before introducing the fish.
Recommended curing time for Sika BlackSeal® Lastic is 4 weeks before adding any fish.
Before attempting any waterproofing of a fish pond, please contact our customer service (031 792 6500) for in depth advice.
It is extremely difficult to waterproof a tiled surface without changing the look of the tile and while you may not want to remove the tiles, it is strongly recommended that the tiles are removed before waterproofing the shower.
Follow step-by-step guidlines on how to waterproof a shower.
The acrylics can be overcoated with a good flexible acrylic coating.