Product Data Sheet Show all documents

SikaBiresin® CR82

(former Biresin® CR82)

Biresin® CR82 is an epoxy resin system designed for the hand lay-up, vacuum bagging and filament-winding processes, especially for applications where curing temperatures of ≥ 75 °C cannot be implemented.

  • 4 hardeners (B) with just one mixing ratio by weight, give a wide range of processing times
  • The reactivity can be adapted by mixing the hardeners
  • Biresin® CR82 systems have optimized visosity and thus good impregnation and non-draining properties.
  • All systems are Germanischer Lloyd approved. Certificate No. WP 1620020 HH
  • Glass transition temperatures up to 80 °C can be achieved dependent on curing conditions
  • Hardeners (B) Biresin® CH80-2 and CH80-6 are also available in blue
Product Data Sheet Show all documents

Usage

Biresin® CR82 is especially suitable for the hand lay-up process and can be used in many areas including marine and general industrial composite.

Advantages

  • 4 hardeners (B) with just one mixing ratio by weight, give a wide range of processing times
  • The reactivity can be adapted by mixing the hardeners
  • Biresin® CR82 systems have optimized visosity and thus good impregnation and non-draining properties.
  • All systems are Germanischer Lloyd approved. Certificate No. WP 1620020 HH
  • Glass transition temperatures up to 80 °C can be achieved dependent on curing conditions
  • Hardeners (B) Biresin® CH80-2 and CH80-6 are also available in blue

Documents