Product Data Sheet Safety Data Sheet Show all documents

EVERBUILD® GATOR GLUE®

Fast setting, high strength adhesive for wood, metals, stone and more.

EVERBUILD® GATOR GLUE® is the adhesive with real bite. It sticks to most common substrates, will set hard in about 30 minutes and even sticks to wet surfaces! EVERBUILD® GATOR GLUE® is supplied as a liquid which is 100% seawater proof, gives exceptionally high bond strength and is resistant to most chemicals. EVERBUILD® GATOR GLUE® may be used internally or externally.  EVERBUILD® GATOR GLUE® can be used to bond most types of wood (hard, soft, exotic, painted), Formica, polystyrene foam, PU foam and glass wool to porous surfaces. Also adheres to metal, stone, ceramics, porcelain, glass, concrete, brick, masonry and various plastics. Typical areas of use include wood jointing and construction, window and door frames, door manufacture, stone repair, staircases, ladders, general household repair, hobby use and much more.

  • Fast setting, initial set in 30 minutes (full cure 24 hours)
  • Exceptional bond strength to wood and most common building surfaces
  • Internal and external use - excellent weathering and aging properties
  • Products foam slightly on application to fill small gaps
  • Excellent Chemical Resistance
Specific Data Contents 100% prepolymers and catalyst (solvent free) Solids 100% (solvent free) Viscosity~4000 mPa.sInitial Set Time30 minutes depending on product
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • General wood jointing and construction
  • Bonds to wood, metal, stone, ceramics etc.
  • Furniture manufacture
  • As a high quality insulation adhesive for foam/glasswool/fibre boarding
 

Advantages

  • Fast setting, initial set in 30 minutes (full cure 24 hours)
  • Exceptional bond strength to wood and most common building surfaces
  • Internal and external use - excellent weathering and aging properties
  • Products foam slightly on application to fill small gaps
  • Excellent Chemical Resistance
Specific Data Contents 100% prepolymers and catalyst (solvent free) Solids 100% (solvent free) Viscosity~4000 mPa.sInitial Set Time30 minutes depending on product

Packaging

65ml, 150ml, 250ml and 500ml Plastic bottle

Colour

Brown

Product Details

Product Information

Shelf Life

18 months from date of manufacture in original unopened containers.

Storage Conditions

Store in original unopened containers between 5 and 25°C. Reseal immediately once used or disposal will be necessary

Density

1.12g/cm3

Application

Consumption

Yield

80-140g/m2
Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean and free from dust, grease and other contaminants. At least one of the materials must be porous. Roughen non-porous surfaces to give a key for the adhesive. To assist cure and achieve maximum bond strength, slightly moisten one surface with a damp cloth. Do not over wet. 

CLEANING OF TOOLS

Any excess foam/adhesive on tools must be removed/cleaned with Everbuild Gun Foam Cleane / acetone before the product sets. Cured adhesive may be removed with EVERBUILD FOAM EATER  or use mechanical abrasion.

Documents