SikaCor® SW-1000 RepaCor

Repair coating / putty with 100 % volume solids. Mechanically- and UV-resistant protective coating in easy-to-use cartridge SikaCor® SW-1000 RepaCor is an abrasion resistant, innovative 2-pack coating / putty for maintenance or repair of (mechanically) damaged coating areas.

  • Solvent-free, 100 % solids, CMR-free
  • Easy to use packaging for difficult repair jobs
  • Single layer coating
  • Early water resistance and under water cure
  • Surface tolerant - can be used on many substrates as manual derusting, stainless steel, galvanization or aluminum, even on foreign coatings (except siloxane-based coatings)
  • Corrosion protection at 500 µm, similar to original shop coating
  • Diffusion resistant
  • Plate like glass flakes increase coating strength
  • Impact and abrasion resistant
  • Colour stable
  • If required overcoatable with 2-pack-PUR topcoats

Usage

Corrosion protection for on- and offshore (wind turbines), for hydraulic engineering (sluicegates, steel sheet piles, etc.) or other elevated steel structures if a simple, high performance and durable repair coating is required.

Advantages

  • Solvent-free, 100 % solids, CMR-free
  • Easy to use packaging for difficult repair jobs
  • Single layer coating
  • Early water resistance and under water cure
  • Surface tolerant - can be used on many substrates as manual derusting, stainless steel, galvanization or aluminum, even on foreign coatings (except siloxane-based coatings)
  • Corrosion protection at 500 µm, similar to original shop coating
  • Diffusion resistant
  • Plate like glass flakes increase coating strength
  • Impact and abrasion resistant
  • Colour stable
  • If required overcoatable with 2-pack-PUR topcoats

Packaging

Cartridge with 295 g, 12 cartridges per box

Colour

RAL 1023 (colour share approved acc. to WSA-TROS), RAL 7035

Slight colour deviations are possible due to raw material characteristics.