Sikadur®-52 ZA
Low viscosity injection resin
Sikadur®-52 ZA is a two part, solvent-free, low viscosity injection-liquid, based on high strength epoxy resins.
- Solvent-free
- Suitable for both, dry and damp conditions
- Usable at low temperatures
- Shrinkage free hardening
- High mechanical and adhesive strengths
- Hard but not brittle
- Low viscosity
- Injectable with single component pumps
Usage
As an injection resin with good adhesion to concrete, mortar, stone, steel and wood.Sikadur®-52 ZA is used to fill and seal voids and cracks in structures such as bridges and other civil engineering buildings, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures. It not only forms an effective barrier against water infiltration and corrosion promoting media, but it also structurally bonds the concrete sections together.
Advantages
- Solvent-free
- Suitable for both, dry and damp conditions
- Usable at low temperatures
- Shrinkage free hardening
- High mechanical and adhesive strengths
- Hard but not brittle
- Low viscosity
- Injectable with single component pumps
Packaging
1.50Ltr (A+B) | Pre-batched unit |
(1.0Ltr A comp : 0.5Ltr B comp) | |
75.0Ltr (A+B) | Pre-batched unit |
(50.0Ltr A comp : 25.0Ltr B comp) |
Colour
Part A | Transparent |
Part B | Brownish |
Part A+B | Yelowish/brownish |
Product Details
Chemical Base
Modified solvent-free two-part epoxy resin
Shelf Life
12 months from date of production
Storage Conditions
Store in dry conditions at temperatures between +5°C and +30°C.
Density
Part A+B mixed: 1.1 kg/l (at +20°C)
Viscosity
Temperature | Part A + B mixed |
+10°C | ~ 1200 cps |
+20°C | ~ 430 cps |
+30°C | ~ 220 cps |
+40°C | - |
Compressive Strength
80 N/mm2 (after 7 days at +23°C) | (ASTM D695-96) |
Tensile Strength in Flexure
61 N/mm2 (after 7 days at +23°C) | (DIN 53452) |
Tensile Strength
37 N/mm2 (after 7 days at +23°C) | (ISO 527) |
Tensile Adhesion Strength
To Concrete:
> 4 N/mm2 (failure in concrete) (after 7 days at +23°C)
Application
Ambient Air Temperature
+5°C min. / +30°C max.
Substrate Temperature
+5°C min. / +30°C max.
Substrate Moisture Content
Dry or damp SSD – (Saturated Surface Dry: no standing water)
Pot Life
Temperature | 1ltr mix |
+5°C | ~ 120 minutes |
+10°C | ~ 80 minutes |
+23°C | ~ 25 minutes |
+30°C | ~ 10 minutes |
+40°C |
Yield
1kg of Sikadur®-52 ZA is ~ equal to 1 litre injection resin.
SUBSTRATE QUALITY
Concrete should be sound, clean, free from oil and grease, old coatings and surface treatments, etc.
SUBSTRATE PREPARATION
Concrete, mortar, stone should be thoroughly prepared by high pressure water jetting or mechanical means such as grinding, chiselling, etc. Cracks must be cleaned to remove dust with compressed air.
MIXING
Pre-batched packaging:
Add all of part B to part A. Mix with an electric mixer at slow speed (max. 250 rpm) for at least 3 minutes. Avoid entraining air.
Bulk packaging:
Add both parts in the correct proportion into a suitable clean, dry container and mix in the same way as for the pre-batched units.
CLEANING OF TOOLS
Clean all tools and application equipment with Sika® Thinner C immediately after use. Hardened / cured material can only be mechanically removed.