Product Data Sheet Show all documents

SikaBiresin® CR80

(former Biresin® CR80)

Biresin® CR80 is a low viscosity epoxy resin system suitable for the production of high-performance fiber reinforced composites parts and moulds with thermal properties up to 80 °C

  • 4 hardeners (B) give a wide range of processing times
  • uniform mixing ration of 100:30 by weight gives even more processing flexibility
  • fast infusion and good wet-out of fabrics and non-woven due to low viscosity and good wetting characteristics
  • all systems are Germanischer Lloyd approved. Certificate No. WP 1620019 HH
  • Particularly good for application where curing temperatures cannot be >75 °C
  • Hardeners (B) Biresin® CH80-1 and CG80-2 can also be used for the manufacture of smaller parts in hand lay-up processing
  • Hardeners (B) Biresin® CH 80-2 and CH 80-6 are also available in blue
Product Data Sheet Show all documents

Usage

Biresin® CR80 is especially suited to the infusion and injection processes due to its low viscosity range. It can be used in the marine, wind turbine and general industrial composite areas.

Advantages

  • 4 hardeners (B) give a wide range of processing times
  • uniform mixing ration of 100:30 by weight gives even more processing flexibility
  • fast infusion and good wet-out of fabrics and non-woven due to low viscosity and good wetting characteristics
  • all systems are Germanischer Lloyd approved. Certificate No. WP 1620019 HH
  • Particularly good for application where curing temperatures cannot be >75 °C
  • Hardeners (B) Biresin® CH80-1 and CG80-2 can also be used for the manufacture of smaller parts in hand lay-up processing
  • Hardeners (B) Biresin® CH 80-2 and CH 80-6 are also available in blue

Documents