Product Data Sheet Show all documents

SikaBiresin® CR120

(former Biresin® CR120)

Biresin® CR120 is a low viscosity epoxy resin system suitable for the production of high-performance fiber reinforced composites with thermal performance up to 120 °C

  • Fast infusion and good wet-out of fabrics and non-wovens due to low viscosity and good wetting characteristics. 
  • All systems Germanischer Lloyd approved. Certificate No. WP 1620034 HH
  • Glass transition temperatures of up to 120 °C depending on curing conditions
  • 2 hardeners (B) give a range of processing times
  • Uniform mixing ratio of 100:30 gives processing flexibility
  • The reactivity can be adapted by mixing the hardeners
Product Data Sheet Show all documents

Usage

Biresin® CR120 is especially suited to the infusion and injection processes due to its low viscosity range. It can be used in the production of general industrial composites as well as in the production of composite tooling by infusion where higher temperature performance is needed.

Advantages

  • Fast infusion and good wet-out of fabrics and non-wovens due to low viscosity and good wetting characteristics. 
  • All systems Germanischer Lloyd approved. Certificate No. WP 1620034 HH
  • Glass transition temperatures of up to 120 °C depending on curing conditions
  • 2 hardeners (B) give a range of processing times
  • Uniform mixing ratio of 100:30 gives processing flexibility
  • The reactivity can be adapted by mixing the hardeners

Documents