Product Data Sheet Show all documents

Sika® Stabilizer-110 MM

(former MasterMatrix® 110)

High-performance viscosity modifying agent (VMA) for fluid concretes

Sika® Stabilizer-110 MM is an innovative product. It is an aqueous solution of a high-molecular weight synthetic copolymer. Thanks to its tailored mode of action in concrete, Sika® Stabilizer-110 MM imparts a level of viscosity within a mix enabling the right balance between fluidity, passing ability and resistance to segregation - apparently opposing properties - to be achieved. The balance is lacking when the fluidity of the concrete is obtained by adding water.  
 Sika® Stabilizer-110 MM is a key component for benefits in:
• Economy: Savings on fines (<0.125 mm), up to 40% faster placing and up to 5 times higher placing productivity.
• Ecology: Less fines - less CO2, and higher concrete durability.
• Ergonomic: No vibration, no noise, low stickiness of the concrete mixture  

Sika® Stabilizer-110 MM offers the following benefits for the concrete industry:
  • Prevents segregation and bleeding.
  • Can be used with all types of cement.
  • Does not affect setting time.
  • Mixes are less sensitive to changes in water demand.
Product Data Sheet Show all documents

Usage

Sika® Stabilizer-110 MM is optimized for use whenever an increase in mix viscosity would be advantageous, especially for:
  • SCC (Self-compacting concrete) with a low Fines content (material passing the 0.125 mm sieve)

Advantages

Sika® Stabilizer-110 MM offers the following benefits for the concrete industry:
  • Prevents segregation and bleeding.
  • Can be used with all types of cement.
  • Does not affect setting time.
  • Mixes are less sensitive to changes in water demand.

Packaging

Sika® Stabilizer-110 MM is available in 20L, 210 litre drums, 1000 litre IBCs or in bulk.

Colour

Clear liquid

Product Details

Product Information

Shelf Life

12 months if stored according to manufacturer’s instructions in original unopened packaging.

Storage Conditions

Sika® Stabilizer-110 MM must be stored at temperatures above 5°C. store under cover, out of direct sunlight and protect from extreme temperatures. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For special storage advice consult the Sika Technical Services Department.

 

Density

0.980 – 1.030

pH-Value

6.0 – 8.0

Total Chloride Ion Content

<0.1%
System information

Compatibility

Sika® Stabilizer-110 MM is compatible with all types of cements. The rheological behaviour induced by Sika® Stabilizer-110 MM is optimised when used in combination with Sika ViscoCrete based superplasticizers. It is incompatible for use with naphthalene sulphonate based superplasticizers.
To produce highly fluid concretes or SCC, Sika® Stabilizer-110 MM needs be used in combination with a superplasticizer admixture of the Sika ViscoCrete or ViscoFlow range in order to guarantee maximum efficiency.

Application

Application Information

Dispensing

Sika® Stabilizer-110 MM is a ready-to-use liquid admixture, which should be added to the concrete during the mixing process together with the water. This is particularly important to obtain maximum efficiency. For best performance it is advisable to continue mixing until the mix is completely homogeneous.
Consumption

Recommended Dosage

The recommended dosage rate is 0.1 to 0.5 litres per 100 kg of the cementitious binder. Other dosages may be used in special cases according to specific production conditions. In this case, please consult your local Technical Services Department.

Documents