Product Data Sheet Show all documents

SikaPlast® GL 118

(former MasterGlenium® 118)

Polycarboxylic ether-based superplasticizer to produce high-quality ready-mix concrete

SikaPlast® GL 118 is an innovative latest generation superplasticizer based on polycarboxylic ether (PCE) polymers and is specially engineered for ready-mix concrete.
SikaPlast® GL 118 greatly improves cement dispersion. At the start of the mixing process the same electrostatic dispersion occurs but the presence of the lateral chains, linked to the polymer backbone, generate a steric hindrance which stabilises the cement particles capacity to separate and disperse. This mechanism provides flowable concrete with greatly reduced water demand.

  • Capability of delivering high performance concrete.
  • Production of a concrete with low water cement ratios with excellent workability retention properties.
  • A versatile product for many application requirements.
  • Easier placing and faster strength development.
  • Improved concrete surfaces.
  • Insurance that concrete meets original specification.
  • High quality durable concrete.
Product Data Sheet Show all documents

Usage

SikaPlast® GL 118 is used to produce high-quality ready-mix concrete.  

Advantages

  • Capability of delivering high performance concrete.
  • Production of a concrete with low water cement ratios with excellent workability retention properties.
  • A versatile product for many application requirements.
  • Easier placing and faster strength development.
  • Improved concrete surfaces.
  • Insurance that concrete meets original specification.
  • High quality durable concrete.

Packaging

SikaPlast® GL 118 is available in 1000 litre IBCs or in bulk.

Colour

Brown liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

ASTM C-494 Type F&G
BS EN 934-2
Product Information

Shelf Life

The shelf life is 12 months from date of manufacture when stored correctly.

Storage Conditions

SikaPlast® GL 118 should be stored out of direct sunlight and protected from extremes of temperatures.

The occurrence of a surface layer with SikaPlast® GL 118 is normal and will have no effect on the performance of the product.

Density

1.06 ± 0,02

pH-Value

5 ± 2,0

Total Chloride Ion Content

“Chloride-free” to EN 934-2

 
System information

Compatibility

SikaPlast® GL 118 is not compatible with Sikament RB superplasticizers.
SikaPlast® GL 118 is suitable for mixes containing:

  • Microsilica (Silica Fume)
  • Fly Ash (PFA)
  • GGBS (ground granulated blast furnace slag)

Application

Application Information

Dispensing

SikaPlast® GL 118 is a ready-to-use admixture to be added to the concrete as a separate component. Optimal results are obtained if SikaPlast® GL 118 is poured into the concrete mix right after the addition of the first 80% of the mixing water, i.e. when all solids are wetted. Avoid adding the admixture to the dry aggregates.
Consumption

Recommended Dosage

The normally recommended dosage rate of SikaPlast® GL 118 is:

0.4 to 1.5 litres per 100kg of total cementitious material. Other dosages may be recommended in special cases according to specific site conditions. In this case, please consult our Technical Services Department for advice.
It is recommended that trials be conducted with the actual materials to be used and at the specified SikaPlast® GL 118 dose rates to verify performance before proceeding to application.

Documents