Product Data Sheet Show all documents

Sika® Antisol®-15

Concrete resin curing agent

Liquid curing agent for preventing water loss in concrete. Ready for use and simple to apply.                Sika® Antisol®-15 complies with ASTM C 309-81 type 1 and 2 Class B                                                                                                                               

  • Reduces incidence of plastic cracking 
  • Ensures that cement can hydrate more efficiently in order to achieve desired strength 
  • Minimises shrinkage 
  • Reduces dusting 
  • Alleviates costly methods of curing i.e. Hessian, water spraying etc.
  • Minimal separation during storage 
Product Data Sheet Show all documents

Usage

Sika® Antisol®-15 curing compound is used mainly for structural concrete surfaces. Sika® Antisol®-15 is sprayed onto newly laid concrete to form a film barrier against premature water loss without disturbance to the normal setting action. The concrete is then allowed to cure and achieve maximum durability.
Antisol is particularly useful in large areas of exposed concrete such as:
  • Highways  
  • Runways and taxiways  
  • Aprons and hard standings 
  • Roof decks
  • Roof decks
  • Retaining walls  
  • Pre-stressed beams and piers etc.
  • Irrigation canals / channels 
 

Advantages

  • Reduces incidence of plastic cracking 
  • Ensures that cement can hydrate more efficiently in order to achieve desired strength 
  • Minimises shrinkage 
  • Reduces dusting 
  • Alleviates costly methods of curing i.e. Hessian, water spraying etc.
  • Minimal separation during storage 

Packaging

25 Litre and 200 litre drums

Colour

White liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Sika® Antisol®-15 White pigmented, solvent based curing agent complies with ASTM C309 Type1 & 2 Class B.
Product Information

Chemical Base

Liquid resin emulsion

Shelf Life

12 months from date of production

Storage Conditions

The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.

Density

~1.0 ± 0,05 kg/l (clear) and ~1.03 kg/l (white)

 

Application

Application Information

Equipment

  • Application by hand type backpack or motorised sprayers
  • Suitability of equipment should be approved before using for full application
  • Clean all tools and application equipment immediately after use.
  • Hardened material can only be removed mechanically.
Consumption

Consumption

Minimum coat of 0.2 litre / m² to attain ASTM C309.  Consumption can be effected by substrate conditions such as permeability, profile, quality and wastage etc.
Application steps

APPLICATION

Stir thoroughly before use to ensure full dispersion of solids. Spray product in a fine mist to completely cover the concrete surface. Maintain the pressure in the application equipment to ensure a consistent spray.

Documents