Product Data Sheet Show all documents

SikaFiber®-30/55 F-HE

Steel Fibre for concrete

Sika® F-HE steel fibres are 30 mm long x 0.55 mm in diameter Hooked end steel fibres for use in concrete as reinforcement.

  • Homogeneous reinforcement
  • Increase energy absorption and load bearing capacity of concrete
  • High impact and abrasion resistance improving concrete quality
  • Increase flexural strength
  • Cost effective alternative to Welded Mesh
  • Safe and easy to use
Product Data Sheet Show all documents

Usage

Applicable as structural reinforcement in concrete for:
  • Mining/ Tunnelling/ Slope Stabilization/ Shotcrete
  • Roads/ Pavements and overlays
  • Precast elements
  • Blast resistant structures
 

Advantages

  • Homogeneous reinforcement
  • Increase energy absorption and load bearing capacity of concrete
  • High impact and abrasion resistance improving concrete quality
  • Increase flexural strength
  • Cost effective alternative to Welded Mesh
  • Safe and easy to use

Packaging

25 Kg bags

Product Details

Product Information

Chemical Base

High tensile, cold drawn, hooked end, steel wire

Shelf Life

24 months from date of production if stored properly in undamaged, unopened, original sealed packaging.

Storage Conditions

Pallets should be protected against rain and snow. Do NOT stack pallets on top of each other.

Dimensions

30 mm Length

0.55 mm Diameter
Technical Information

Tensile Strength

1100 N/mm² min

Application

Application Information

Dispensing

Add Sika® Fibres directly into the mixing system during or after the batching of the ingredients, before mixing at high speed.
The mixing time will be slightly increased with the addition of Sika® Fibres. Mix thoroughly for at least 5 minutes at high revolutions.
NEVER add fibres directly into the mixing water.
Consumption

Recommended Dosage

Must only be dosed as per Engineer’s specification.

(Typically, steel fibre dosage will be in the range of 20kg to 40kg per cubic metre).

Documents