SikaRapid® CC
Set accelerating admixture
SikaRapid® CC is a quick setting, liquid admixture which brings about rapid setting and hardening of Portland cement mixes.
- Easy to use
- Economical
- Induces rapid setting
- Increased mechanical strengths
Usage
SikaRapid® CC is used where rapid setting of Portland cement is required, such as:- Sealing of leaking joints in brickwork
- Quick patching of plaster or mortar
- Fast setting and hardening of unreinforced concrete
Advantages
- Easy to use
- Economical
- Induces rapid setting
- Increased mechanical strengths
Packaging
5 Litre and 25 Litre plastic containers
Colour
Opaque Liquid
Product Details
Chemical Base
Calcium Chloride
Shelf Life
12 months from date of production
Storage Conditions
Store properly in undamaged containers, in dry conditions at temperatures between +5°C and +25°C.
Protect from direct sunlight and frost.
Density
1.2 kg/litre (at +25°C)
Application
Dispensing
- Ensure that SikaRapid® CC is thoroughly mixed prior to use.
Add SikaRapid® CC to the clean mixing water and stir thoroughly before adding to the mortar/concrete mix. The volume of SikaRapid® CC depends on the required setting time. For cement mortars it is advisable to use a 1:4 cement sand mix. For concrete, a minimum of 300kg/m3 cement is recommended, with a minimum 28 day compressive strength of 25Mpa.
- Leak Plugging
Add approximately 3 parts fresh Portland cement to 1 part SikaRapid® CC and mix thoroughly until plastic consistency is achieved (+ 30 seconds). Form a plug and compress it into the cavity, applying pressure continuously for approximately 2 minutes until cement has set.
- Rapid setting and Hardening
Add the SikaRapid® CC and water mixture to the dry cement mortar/concrete mixing thoroughly and quickly until a homogeneous mix is achieved. Place in position immediately. Do not apply loads or traffic for at least 6 hours.
Restrictions
When using SikaRapid® CC a suitable mix design has been taken into account and local material sources should be trialled.
SikaRapid® CC contains calcium chloride and should not be used in concrete or mortar which has reinforcing bars or comes into direct contact with steel.
SikaRapid® CC should not be added to dry cement.
SikaRapid® CC should be added with the mixing water or introduced at the end of the mixing process.
Before application, suitability tests must be performed.
Recommended Dosage
1 – 5 Litres per 50 kg cement.
Recommended dosage is 2 Litre per 50 kg cement