Product Data Sheet Show all documents

SikaPlast® GL 3575

(former MasterGlenium® 3575)

Polycarboxylic ether-based superplasticizer for the production of high-quality ready-mix concrete

SikaPlast® GL 3575 is an innovative latest generation superplasticizer based on polycarboxylic ether (PCE) polymers and is specially engineered for ready-mix concrete.
SikaPlast® GL 3575 is differentiated from conventional superplasticisers, such as those based on sulphonated naphthalene formaldehyde condensate in that it is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process the same electrostatic dispersion occurs but the presence of the lateral chains, linked to the polymer backbone, generate a steric hindrance which stabilises the cement particles capacity to separate and disperse. This mechanism provides flowable concrete with greatly reduced water demand.

  • Capability of delivering high performance concrete at any time to the job site in place.
  • Production of a concrete with low water cement ratios with excellent workability retention properties.
  • Single product for many application needs.
  • Easier placing and faster strength development.
  • Improved concrete surfaces.
  • Insurance that concrete meets original specification.
  • High quality durable concrete.
Product Data Sheet Show all documents

Usage

SikaPlast® GL 3575 is used for the production of high-quality ready-mix concrete.  

Advantages

  • Capability of delivering high performance concrete at any time to the job site in place.
  • Production of a concrete with low water cement ratios with excellent workability retention properties.
  • Single product for many application needs.
  • Easier placing and faster strength development.
  • Improved concrete surfaces.
  • Insurance that concrete meets original specification.
  • High quality durable concrete.

Packaging

SikaPlast® GL 3575 is available in 1000 litre IBCs or in bulk.

Colour

Brownish liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

ASTM C-494 Type F&G
BS EN 934-2
Product Information

Shelf Life

The shelf life is 12 months from date of manufacture when stored correctly.

Storage Conditions

SikaPlast® GL 3575 should be stored out of direct sunlight and protected from extremes of temperatures.

Density

1.060 -1.080

pH-Value

7.0 – 9.0

Total Chloride Ion Content

“chloride-free” to EN 934-2
System information

Compatibility

SikaPlast® GL 3575 is not compatible with Sikament RB superplasticizers.
SikaPlast® GL 3575 is suitable for mixes containing:
• Microsilica (Silica Fume)
• Fly Ash (PFA)
• GGBS (ground granulated blast furnace slag)

Application

Application Information

Dispensing

SikaPlast® GL 3575 is a ready-to- use admixture to be added to the concrete as a separate component. Optimal result is obtained if SikaPlast® GL 3575is poured into the concrete mix right after the addition of the first 80% of the mixing water, i.e. when all solids are wetted. Avoid adding the admixture to the dry aggregates.
Consumption

Recommended Dosage

The normally recommended dosage rate of SikaPlast® GL 3575 is:

0.45 to 1.50 litres per 100kg of total cementitious material. Other dosages may be recommended in special cases according to the specific site conditions. In this case, please consult our Technical Services Department for advice.

Documents