Sikafloor® DecoDur ES-26 Flake
Smooth, epoxy, low voc emission flooring system with a decorative full-flake broadcast
Sikafloor® DecoDur ES-26 Flake is a smooth, coloured, epoxy flooring system with low VOC emissions. It has a decorative, full-flake broadcast surface flooring system and it is used for indoor applications.
- Good resistance to abrasion
- Decorative design
- Good mechanical resistance
- Low Airborne Molecular Contaminants (AMC) emissions
- Low VOC emissions
- Low VOC content
- Seamless and hygienic
System Structure
Usage
Sikafloor® DecoDur ES-26 Flake is used in the following commercial and public buildings and areas:- Schools and universities
- Healthcare facilities and hospitals
- Shopping malls and museums
- The System may only be used by experienced professionals.
- The System may only be used for interior applications.
Advantages
- Good resistance to abrasion
- Decorative design
- Good mechanical resistance
- Low Airborne Molecular Contaminants (AMC) emissions
- Low VOC emissions
- Low VOC content
- Seamless and hygienic
Appearance
Lightly textured finish
System Details
APPROVALS / STANDARDS
-
Fire Classification Report EN 13501-1, Ghent, No. CR 22-0344-01
System Structure
Sikafloor® DecoDur ES-26 Flake
| Layer | Product | |
| 1. | Primer | Sikafloor®-150 Sikafloor®-151 Sikafloor®-156 Sikafloor®-161 Sikafloor®-1590 Contact Sika technical service for information on choosing the right primer for your project. |
| 2. | Wearing layer | Sikafloor®-263 SL N Sikafloor®-264 N Filled up to 1:1 with Quartz sand (0.1–0.3 mm), colour approximately matching the colour of the following Sika® PVA Colorflakes. |
| 3. | Broadcast | Broadcast in excess with Sika® PVA Colorflakes 3 mm. |
| 4. | Seal coat | Sikafloor®-169 |
Composition
Epoxy
Nominal thickness
2 mm to 3 mm
Tensile Adhesion Strength
≥ 1.5 MPa | (EN 1542) |
Reaction to Fire
Class Cfl-s1 | (EN 13501-1) |
Chemical Resistance
Laboratory-defined resistance to many individual chemicals. Before proceeding, contact Sika Technical Service for specific information.
Skid / Slip Resistance
| R 9 | (DIN 51130) |
Application
Ambient Air Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Relative Air Humidity
Maximum | 80 % r.h. |
Dew Point
Refer to the individual Product Data Sheet.
Substrate Temperature
Maximum | +30 °C |
Minimum | +10 °C |
Substrate Moisture Content
Refer to the individual Product Data Sheet.
Waiting Time / Overcoating
When using Sikafloor®-1590 refer to the individual Product Data Sheet for specific information on waiting time to overcoating.
Before applying the wearing layer on the primer layer allow:
Temperature | Minimum | Maximum |
+10 °C | 17 hours | 3 days |
+20 °C | 9 hours | 48 hours |
+30 °C | 7 hours | 24 hours |
Before applying Sikafloor®-169 on the wearing layer allow:
Temperature | Minimum | Maximum |
+10 °C | 30 hours | 4 days |
+20 °C | 24 hours | 48 hours |
+30 °C | 16 hours | 24 hours |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +15 °C | ~18 hours | ~42 hours | ~10 days |
| +20 °C | ~16 hours | ~36 hours | ~7 days |
| +30 °C | ~12 hours | ~24 hours | ~5 days |
Note: Times are approximate and will be affected by changing ambient conditions, particularly temperature and relative humidity.
Consumption
Layer | Product | Consumption |
Primer | Sikafloor®-150 Sikafloor®-151 Sikafloor®-156 Sikafloor®-161 Sikafloor®-1590 | 1–2 × 0.3–0.5 kg/m² |
Wearing layer | Sikafloor®-263 SL N Sikafloor®-264 N (filled with up to 1:1 with quartz sand 0.1–0.3 mm) | 1 × ~1.9 kg/m² per mm |
Broadcast | Broadcast in excess with Sika® PVA Colorflakes 3 mm | ~1.0 kg/m² |
Seal coat | Sikafloor®-169 Sand the surface between coats. | 1 × ~0.6–0.7 kg/m² 1 × ~0.3 kg/m² |