Sikafloor®-390 N
Sikafloor®-390 N is a 2-part epoxy, coloured, crack-bridging, wall and flooring resin. Provides a hard wearing, seamless, low maintenance, chemical and abrasion resistant, smooth gloss finish or slip resistant finish when broadcast with different aggregate grades. Varying thickness’s can be achieved from 1,5–3,0 mm. Internal and external use.
- High chemical resistance
- Seamless
- Crack-bridging
- Waterproof
- Good abrasion resistance
- Slip resistant surface to suit clients requirements
Usage
- Chemically resistant protective finish for concrete and screed substrates in bund areas against contaminating liquids.
Advantages
- High chemical resistance
- Seamless
- Crack-bridging
- Waterproof
- Good abrasion resistance
- Slip resistant surface to suit clients requirements
Packaging
Part A | 21,25 kg container |
Part B | 3,75 kg container |
Part A+B | 25 kg ready to mix unit |
Refer to current price list for packaging variations
Colour
Final floor appearance: Smooth gloss / semi gloss finish
Resin - Part A | coloured, liquid |
Hardener - Part B | transparent, liquid |
Final floor finish colour: Available in various colour shades
Applied colours selected from colour charts will be approximate.
For colour matching: Apply colour sample and confirm selected colour under real lighting conditions.
When product is exposed to direct sunlight, there may be some discolouration and colour variation, this has no influence on the function and performance of the coating.
Product can be used outside provided discolouration is acceptable by the customer.
Product Details
ENVIRONMENTAL INFORMATION
- Conformity with LEED v4 MRc 2 (Option 1): Building Product Disclosure and Optimization – Environmental Product Declarations
- Conformity with LEED v4 MRc 4 (Option 2): Building Product Disclosure and Optimization - Material Ingredients
APPROVALS / STANDARDS
- Fire classification in accordance with DIN 4102, class B1, Report-No. PZ-Hoch-130683-4, Germany, April 2014.
- Fire classification in accordance with DIN EN 13501-1: 2010, class Bfl-S1, Report-No. KB-Hoch-141525, Germany, January, 2015
- Particle emission certificate Sikafloor-390 N CSM Statement of Qualification - ISO 14644-1, class 3 - Report No.SI 1403-695 and GMP class A, Report No. 1403-695
- Outgassing emission certificate Sikafloor-390 N CSM Statement of Qualification - ISO 14644-8, class -9.6 - Report No. SI 1403-695.
- Good biological Resistance in accordance with ISO 846, CSM Report No. SI 1403-695
- Fluorescent test contamination (Riboflavin test ) : very good, CSM Statement of Qualification , Report No.SI 1403-695
- Water protection system Sikafloor®-390 N, DIBt, Approval No. Z-59.12-392
- Indirect food contact Sikafloor®-390 N, Wessling, Test report No. CAL 19-024852-1
- CE Marking and Declaration of Performance to EN 13813 - Resin screed material for internal use in buildings
- CE Marking and Declaration of Performance to EN 1504-2 - Surface protection product for concrete - Coating
Chemical Base
Epoxy
Shelf Life
24 months from date of production.
Storage Conditions
The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Always refer to packaging.
Density
Part A | ~1,73 kg/l |
Part B | ~1,05 kg/l |
Resin mixed | ~1,6 kg/l |
All density values at +23 °C
Solid content by weight
~100 %
Solid content by volume
~100 %
Product Declaration
EN 13813: Resin screed material for internal use in buildings.
EN 1504-2: Surface protection product for concrete - Coating.
Shore D Hardness
~60 (14 days / +23 °C) | (DIN 53 505) |
Abrasion Resistance
75 mg (CS 10/1000/1000) (7 days / +23 °C) | (EN ISO 5470-1 Taber Abraser Test) |
Tensile Strength in Flexure
~10 N/mm2 (7 days / +23 °C) | (DIN 53455) |
Tensile Adhesion Strength
> 1,5 N/mm² (failure in concrete) | (ISO 4624) |
Crack Bridging Ability
0,4 mm Static, class A5 (+23 °C) | (DIN EN 1062-7) |
Chemical Resistance
Resistant to many chemicals. Contact Sika Technical Services for additional information
Thermal Resistance
Exposure* | Dry heat |
Permanent | +50 °C |
Short-term max. 7 d | +80 °C |
Short-term max. 12 h | +100 °C |
Short-term moist/wet heat* up to +80 °C where exposure is only occasional (i.e. during steam cleaning etc.)
* No simultaneous chemical and mechanical exposure.
Application
Mixing Ratio
Part A : Part B = 85 : 15 (by weight)
Layer Thickness
Refer to the System Data Sheets: Sikafloor® MultiDur ES-39, Sikafloor® MultiDur ET-39 V and Sikafloor® MultiDur EB-39
Ambient Air Temperature
+10 °C min. / +30 °C max.
Relative Air Humidity
80 % max.
Dew Point
Beware of condensation.
The substrate and uncured applied floor material must be at least +3 °C above dew point to reduce the risk of condensation or blooming on the floor finish.
Low temperatures and high humidity conditions increase the probability of blooming.
Substrate Temperature
+10 °C min. / +30 °C max.
Substrate Moisture Content
≤4 % parts by weight
Test method: Sika®-Tramex meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet).
Pot Life
Temperature | Time |
+10 °C | ~60 minutes |
+20 °C | ~30 minutes |
+30 °C | ~10 minutes |
Curing Time
Before applying Sikafloor®-390 N on Sikafloor®-390 N allow:
Substrate temperature | Minimum | Maximum |
+10 °C | 48 hours | 3 days |
+20 °C | 30 hours | 2 days |
+30 °C | 20 hours | 30 hours |
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Consumption
Wall top coat (textured)
~1,2 kg/m² per layer (Includes 2,5–4 % by weight Extender T)
Wearing layer
~1,6 kg/m² / mm
Broadcast layer seal / top coat
~ 0,75-0,85 kg/m² (Includes 5 % by weight Thinner C)
General
These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc. For detailed information, refer to the System Data Sheets: Sikafloor® MultiDur ES-39, Sikafloor® MultiDur ET-39 V and Sikafloor® MultiDur EB-39.
MIXING
Prior to mixing all parts, mix separately Part A (resin) using a low speed single paddle electric stirrer (300–400 rpm). Add Part B (hardener) to Part A and mix part A + B continuously for 3,0 minutes until a uniform mix has been achieved. When Parts A and B have been mixed, if required, gradually add Extender T or Thinner C. Mix for a further 2,0 minutes until a uniform mix has been achieved. To ensure thorough mixing, pour materials into another container and mix again to achieve a smooth consistent mix. Excessive mixing must be avoided to minimise air entrainment. During the final mixing stage, scrape down the sides and bottom of the mixing container with a flat or straight edge trowel at least once to ensure complete mixing. Mix full units only. Mixing time for A+B = 3,0 minutes. A+B+Extender T= 5,0 minutes.
APPLICATION
Strictly follow installation procedures as defined in method statements, application manuals and working instructions which must always be adjusted to the actual site conditions.
Prior to application, confirm substrate moisture content, relative air humidity, dew point, substrate, air and product temperatures. If moisture content > 4 % parts by weight, Sikafloor® EpoCem® may be applied as a Temporary Moisture Barrier (T.M.B.) system.
Wall top coat (textured)
The first coat of Sikafloor®-390 N mixed with 2,5- 4 % of Extender T, must be applied by trowel. After waiting the appropriate curing time, apply a second coat of Sikafloor®-390 N, mixed with 2,5- 4 % of Extender T by trowel.
Wearing layer
Pour mixed Sikafloor®-390 N onto prepared substrate and spread evenly using a suitable trowel or pin leveller to the required thickness.
Spike roller immediately in two directions at right angles to each other to remove trowel marks, aid air release, ensure an even thickness and obtain the required surface finish.
Slip resistant broadcast layer
Pour mixed Sikafloor®-390 N onto prepared substrate and spread evenly using a suitable trowel or pin leveller to the required thickness.
Spike roller immediately in two directions at right angles to each other to aid air release and ensure an even thickness. After about 15 minutes (at +20 °C) but before 30 minutes (at +20 °C), broadcast with quartz sand or silicon carbide, at first lightly and then to excess to produce an even distribution surface profile. Allow Sikafloor®-390 N to initially cure and remove all loose sand by vacuum extraction equipment.
Broadcast layer seal / top coat
After waiting the appropriate curing time, pour the mixed Sikafloor®-390 N + 5 % by weight Thinner C onto the slip resistant broadcast layer and spread evenly using a squeegee at the required consumption rate to completely encapsulate the sand. Then using a short-piled roller, back roller in two directions at right angles to each other. A seamless finish can be achieved if a ‘wet’ edge is maintained during application.
CLEANING OF TOOLS
Clean all tools and application equipment with Thinner C immediately after use. Hardened and/or cured material can only be removed mechanically.