Sikafloor®-405
Sikafloor®-405 is a one part, pigmented, highly elastic, solvent containing, UV resistant, moisture triggered curing polyurethane resin coating
- Moisture triggered
- Highly elastic
- Crack-bridging
- Waterproof
- Water vapour permeable
- UV resistant, non-yellowing
- Weather resistant
- Abrasion resistant with normal use
- Slip resistant
- Fast cure
- Excellent adhesion
Usage
Sikafloor®-405 is used as:- Slip resistant, UV resistant, waterproof, crack bridging coating for concrete, cementitious screed substrates and tiles.
- For light to medium mechanical exposure
- For balconies, terraces, footbridges, stairways , galleries etc.
Advantages
- Moisture triggered
- Highly elastic
- Crack-bridging
- Waterproof
- Water vapour permeable
- UV resistant, non-yellowing
- Weather resistant
- Abrasion resistant with normal use
- Slip resistant
- Fast cure
- Excellent adhesion
Packaging
5 litres (6.5 kg) , 15 litres (19.5 kg)
Colour
Coloured liquid
RAL 1015, RAL 7015, RAL 7032, RAL 7035, RAL 7042
Product Details
APPROVALS / STANDARDS
- Coating for waterproofing according to the requirements of the ETAG-005, DoP 0208010301000000171148 / 1100000011148 / 1200000011148 / 1300000011148 certified by Factory Production Control Body, 0836 and provided with the CE-mark.
- European Technical Approval ETA-13/0231, Sikafloor®-405.
- BUtgb (ATG): no. 06/2660 (Belgium)
- Norisko CDC SEL Balcons (France)
- Determination of the resistance to fatigue movement according draft EOTA technical report no. 008, University de Liège,Belgium. Report no. LMC/07/148
Chemical Base
Polyurethane
Shelf Life
6 months from date of production.
Storage Conditions
The packaging must be stored in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between 0°C and +25°C.
Density
1.30 kg/l | (EN ISO 2811-1) |
Density value at +23°C.
Solid content by weight
~ 79% | (EN ISO 3251) |
Solid content by volume
~ 71% | (EN ISO 3251) |
Tensile Strength
Unreinforced film | ~10 N/mm2 |
Reemat Premium* | ~~17 N/mm2 |
* As part of the Sikafloor® MonoFlex MB-55 / MB-56 / MB-57
Chemical Resistance
Resistant to many chemicals. Please contact Sika technical service.
Application
Ambient Air Temperature
+2°C min. / +30°C max.
Relative Air Humidity
80% r.h. max.
35% min. (below +20°C: 45% min.)
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3°C above dew point to reduce the risk of condensation or blooming on the floor finish.
Substrate Temperature
+2°C min. / +30°C max.
Frozen substrates must defrost for 24 hours.
Substrate Moisture Content
Visible damp free (maximum 18% wood moisture equivalent).
< 6% pbw moisture content Test method: Sika®-Tramex meter, < 4% CM - measurement or Oven-dry-method.
No rising moisture according to ASTM (Polyethylene sheet).
Pot Life
The material in opened containers should be applied immediately. With open containers surface film formation will happen within approx. 24 hours. High temperatures and high air humidity will accelerate curing significantly.
Curing Time
Before overcoating Sikafloor®-405 allow:
Substrate temperature | Minimum | Maximum |
+10°C | 24 hours | 7 days |
+20°C | 18 hours | 7 days |
+30°C | 12 hours | 7 days |
Application should take place within 7 days, further delays will require re-priming with Sika® Reactivation Primer, assuming that all dirt has been removed and contamination is avoided.
Times are approximate and will be affected by changing ambient conditions particularly temperature and relative humidity.
Applied Product Ready for Use
Temperature | Surface dry | Through dry | Hard by |
+20°C / r.h. 50% | ~ 6 hours | ~ 10 hours | ~ 18 hours |
+2°C | ~ 12 hours | ~ 20 hours | ~ 30 hours |
Note: Times are approximate and will be affected by changing ambient conditions and the layer thickness.
Consumption
~0.4 - 1.45 kg/m²/layer depending on the application. Please refer to the respective System Data Sheet.
MIXING
Slightly stir Sikafloor®-405 mechanically before using.
Mixing Tools:
Sikafloor®-405 must be mixed using a low speed electric stirrer (300 - 400 rpm) or other suitable equipment.
APPLICATION
Prior to application, confirm substrate moisture content, relative humidity and dew point. As a primer the product can be applied by brush or medium pile nylon roller and as acoating by long pile roller.
CLEANING OF TOOLS
Clean all tools and application equipment with Thinner C immediately after use. Hardened and/or cured material can only be removed mechanically.