Product Data Sheet Show all documents

Sikafloor®-66

Two Component Polyurethane Protective Coating

Sikafloor®-66is a solvent based hardwearing, UV resistant polyurethane coating.

  • Excellent adhesion
  • Hard, very durable surface finish
  • High gloss - easy to clean
  • Very good chemical resistance
  • UV resistant - Non - yellowing
  • Quick drying
Product Data Sheet Show all documents

Usage

Sikafloor®-66may be used internally or externally on floors or walls, where a very durable, decorative protective coating is required, such as in:
  • Workshops
  • Factories
  • Laboratories
  • Kitchens
  • Passage ways
  • Steel tanks and pipes

Advantages

  • Excellent adhesion
  • Hard, very durable surface finish
  • High gloss - easy to clean
  • Very good chemical resistance
  • UV resistant - Non - yellowing
  • Quick drying

Packaging

5 ltr and 2.5 ltr containers

Colour

Liquid                 Clear Gloss and Matt

Product Details

Product Information

Chemical Base

Solvent based polyurethane

Shelf Life

12 months in original, unopened container.

Storage Conditions

Store in a dry area between 5ºC and 30ºC. Protect from direct sunlight.

Density

Approximately 1,25 kg/litre mixed (colours) and 1,00 kg/litre mixed (clear)

Application

Application Information

Ambient Air Temperature

Min. 10°C – max. 35° C

Substrate Temperature

Min. 10°C – max. 30°C. 

Substrate temperature must always be at least 3°C above the dew point.

Pot Life

Temperature

Time (minutes)

+10°C

45 min

+20°C

25 min

+30°C15 min

Times are approximate and will be affected by changing ambient conditions.

Curing Time

Temperature

Tack free

Foot traffic (hrs)

Full cure (days)

10°C

5 hrs

24 hrs

12 days

20°C

3 hrs

12 hrs

7 days

30°C

1.5 hrs

8 hrs

5 days

Waiting Time / Overcoating

Temperature

Minimum (hours)

Maximum (hours)

+10°C

16

36

+20°C

12

24

+30°C

8

12
Consumption

Consumption

Primer: Sikafloor®-66   8 – 10 m² / litre per coat.
Coating: Sikafloor®-66 a min. of two coats at between 8 – 10 m2/litre per coat should be applied.
Consumption is dependant on substrate conditions such as permeability, quality, profile and wastage, etc.
Application steps

MIXING

Pour Part B into Part A and mix thoroughly using a flat bladed paddle, steel spatula or slow speed drill (400-600Rpm) for at least 3 minutes and until a homogeneous consistency is achieved.  Use immediately.

APPLICATION

Sikafloor®-66 can be applied by brush, roller or air-less spray

CLEANING OF TOOLS

Clean all tools and equipment immediately after use with Sika® Thinner C.

 

Documents