SikaForce®-800 Red

2-component, fast curing in 30 minutes, easy sanding polyurethane profile and surface fillers for wind turbine blade repair.

  • Excellent mixing application and tooling properties
  • Very good adhesion to fiberglass surfaces
  • Non-sag up to layer thickness of approx. 20mm
  • Fast sanding time
  • Easy to sand (does not clog the sandpaper)

Usage

SikaForce® -7800 Red is used for profile shaping and surface filling of damaged rotor blades in the wind turbine industry.
This product is suitable for professional experienced users only.
Test with actual substrates and conditions must be performed to ensure adhesion and material compatibility.

Advantages

  • Excellent mixing application and tooling properties
  • Very good adhesion to fiberglass surfaces
  • Non-sag up to layer thickness of approx. 20mm
  • Fast sanding time
  • Easy to sand (does not clog the sandpaper)

Packaging

2 component cartridge - 195 ml