Adhesive
Anchor
Solutions
Sika AnchorFix® -2+ is an anchoring adhesive for medium to high loads.
WHERE TO USE
Sika AnchorFix® -2+ is a solvent and styrene-free, epoxy acrylate-based, two-component, anchoring adhesive for normal to moderate climate conditions.
Sika AnchorFix® -2+ can be used as a fast curing anchoring adhesive for all grades of:
- Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
- concrete (in cracked and non-cracked)
- Solid masonry
- Steel
- Hard natural stone*
- Solid rock*
*These substrates may vary greatly, in particular with regard to strength, composition, and porosity. Therefore, for each application the suitability of Sika AnchorFix® -2+ adhesive, must be tested by first applying the product only to a sample area. Check in particular Bond strength, surface staining and discoloration,
CHARACTERISTICS
- Fast curing
- Standard guns can be used
- High load capacity
- ETA to ETAG 001 for anchoring in concrete
- ETA to ETAG 001 for rebar connections
- Suitable for cracked concrete
- Drinking water certified
- LEED Attestation available
- Non-sag, even overhead
- Styrene-free
- Low odour
- Low wastage
COLOUR
- Component A : white
- Component B : black
- Component A & B mixed : grey